A high quality water based, non-toxic decorative textured coating, for both exterior and interior use. It can be applied in a variety of ways to produce effective finishes. It consists of a primer coat,  base coat, polish coat and glaze coat. The polish coat determines the final shade and it can be made to any shade depending on line with customer taste and requirements. It has 100% washability and a lifespan of over 15 years after application. It is applied by Intercolor Professional Painters and is priced per square meter. For more information, refer to the attached technical data sheet.
 
 
PRODUCT TECHNICAL DATA SHEET        -    I N T E R P E A R L  T E X T U R E D   C O A T I N G
 
PRODUCT DESCRIPTION:     A water based, non-toxic, high quality decorative  textured

                                         coating, for interior use that can be applied in a variety of

                                         ways to produce effective finishing.
 
RECOMMENDED USE:          Concrete, Gypsum, Wood and well prepared walls.
 
APPLICATION:                    By sponge roller, wire comb, texture gun, patterned roller.
 
SURFACE PREPARATION:     The surface must be cleaned and free of all loose
                                         particles, by the use of stiff bristle brushes.  Tex  primer
 
COLOUR:                           White, but can be tinted on special request.
 
SPREADING RATE:               1.5 – 2m2 / Litre, depending on desired texture.
 
SPECIFIC GRAVITY:            1.7
 
VOLUME SOLIDS:               65%
 
FLASH POINT:                   Non-Flammable
 
MIXING RATIO:                 Single pack
 
THINNER /CLEANER:           Water
 
DRYING TIME:                   2 hours
 
STORAGE & HANDLING:     The product should be kept in a cool and well ventilated

                                        place, protected from heat and direct  sunlight. Containers

                                        must be kept tightly closed.